How to use a multimeter 4 - Alternative current measurement

Here's an alternative method of measuring current by measuring voltage, resistance and using Ohm's Law. It may be an easier method.

USE:

• De-energise the circuit.
• Set up the DMM for resistance measurement and select say 2kΩ range. (You can change ranges later if needed.)
• Connect the DMM to measure the resistor in the circuit, as shown. Write down its value.
• Set up the DMM for voltage measurement and select say 20V range. (You can change ranges later if needed.) You should NOT have to change the connections.
• Energise the circuit.

• Measure the voltage and write down its value.
• Use Ohm’s Law to calculate current as shown.

END of DMM